Skip to main content
Version: 0.5.0

Deploy the BookInfo Application

Introduction

BookInfo is a sample application from Istio that is composed of four separate microservices: productpage, details, reviews, and ratings. In this topic, we will use the BookInfo application to demonstrate inter-slice communication.

Prerequisites

Before you begin, ensure the following prerequisites are met:

  • You have a KubeSlice configuration with two or more clusters registered. For more information, see Installing KubeSlice and Registering the Worker Cluster.
  • You have Istio installed in all registered worker clusters. For more information, see Installing Istio.
  • Before creating a slice, create the bookinfo namespace in all the participating worker clusters. Use the following command to create the bookinfo namespace:
    kubectl create ns bookinfo
  • Inject the istio label to the bookinfo namespace using the following command:
    kubectl label namespace bookinfo istio-injection=enabled
  • You have the slice created across the worker clusters. For more information, see Creating a Slice.

Create the BookInfo Deployment YAML Files

Using the templates below, create the necessary .yaml files to deploy the BookInfo application. All fields in the template will remain the same except for the slice name which must be replaced with the name of your slice.

info

These instructions will guide you through deploying the Product Page service to a cluster we will refer to as the productpage cluster, and the remaining services as well as service exports will be deployed to a cluster referred to here as the services cluster.

Productpage

Using the template below, create productpage.yaml. All fields in the template will remain the same except for the slice name which must be replaced with the name of your slice.

##################################################################################################
# Productpage service
##################################################################################################
apiVersion: v1
kind: Service
metadata:
name: productpage
labels:
app: productpage
service: productpage
spec:
type: NodePort
ports:
- port: 9080
name: http
selector:
app: productpage
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: bookinfo-productpage
labels:
account: productpage
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: productpage-v1
labels:
app: productpage
version: v1
spec:
replicas: 1
selector:
matchLabels:
app: productpage
version: v1
template:
metadata:
labels:
app: productpage
version: v1
spec:
serviceAccountName: bookinfo-productpage
containers:
- name: productpage
image: docker.io/istio/examples-bookinfo-productpage-v1:1.16.2
imagePullPolicy: IfNotPresent
ports:
- containerPort: 9080
volumeMounts:
- name: tmp
mountPath: /tmp
securityContext:
runAsUser: 1000
env:
- name: REVIEWS_HOSTNAME
value: reviews.bookinfo.svc.slice.local
- name: DETAILS_HOSTNAME
value: details.bookinfo.svc.slice.local
- name: netshoot
image: nicolaka/netshoot
imagePullPolicy: IfNotPresent
command: ["/bin/sleep", "3650d"]
securityContext:
capabilities:
add: ["NET_ADMIN"]
allowPrivilegeEscalation: true
privileged: true
volumes:
- name: tmp
emptyDir: {}

Details

Using the template below, create details.yaml. All fields in the template will remain the same except for the slice name which must be replaced with the name of your slice.

##################################################################################################
# Details service
##################################################################################################
apiVersion: v1
kind: Service
metadata:
name: details
labels:
app: details
service: details
spec:
ports:
- port: 9080
name: http
selector:
app: details
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: bookinfo-details
labels:
account: details
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: details-v1
labels:
app: details
version: v1
spec:
replicas: 1
selector:
matchLabels:
app: details
version: v1
template:
metadata:
labels:
app: details
version: v1
spec:
serviceAccountName: bookinfo-details
containers:
- name: details
image: docker.io/istio/examples-bookinfo-details-v1:1.16.2
imagePullPolicy: IfNotPresent
ports:
- containerPort: 9080
securityContext:
runAsUser: 1000
- name: netshoot
image: nicolaka/netshoot
imagePullPolicy: IfNotPresent
command: ["/bin/sleep", "3650d"]
securityContext:
capabilities:
add: ["NET_ADMIN"]
allowPrivilegeEscalation: true
privileged: true

Ratings

Using the template below, create ratings.yaml. All fields in the template will remain the same except for the slice name which must be replaced with the name of your slice.

##################################################################################################
# Ratings service
##################################################################################################
apiVersion: v1
kind: Service
metadata:
name: ratings
labels:
app: ratings
service: ratings
spec:
ports:
- port: 9080
name: http
selector:
app: ratings
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: bookinfo-ratings
labels:
account: ratings
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: ratings-v1
labels:
app: ratings
version: v1
spec:
replicas: 1
selector:
matchLabels:
app: ratings
version: v1
template:
metadata:
labels:
app: ratings
version: v1
spec:
serviceAccountName: bookinfo-ratings
containers:
- name: ratings
image: docker.io/istio/examples-bookinfo-ratings-v1:1.16.2
imagePullPolicy: IfNotPresent
ports:
- containerPort: 9080
securityContext:
runAsUser: 1000
- name: netshoot
image: nicolaka/netshoot
imagePullPolicy: IfNotPresent
command: ["/bin/sleep", "3650d"]
securityContext:
capabilities:
add: ["NET_ADMIN"]
allowPrivilegeEscalation: true
privileged: true

Reviews

Using the template below, create reviews.yaml. All fields in the template will remain the same except for the slice name which must be replaced with the name of your slice.

##################################################################################################
# Reviews service
##################################################################################################
apiVersion: v1
kind: Service
metadata:
name: reviews
labels:
app: reviews
service: reviews
spec:
ports:
- port: 9080
name: http
selector:
app: reviews
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: bookinfo-reviews
labels:
account: reviews
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: reviews-v3
labels:
app: reviews
version: v3
spec:
replicas: 1
selector:
matchLabels:
app: reviews
version: v3
template:
metadata:
labels:
app: reviews
version: v3
spec:
serviceAccountName: bookinfo-reviews
containers:
- name: reviews
image: docker.io/istio/examples-bookinfo-reviews-v3:1.16.2
imagePullPolicy: IfNotPresent
env:
- name: LOG_DIR
value: "/tmp/logs"
ports:
- containerPort: 9080
volumeMounts:
- name: tmp
mountPath: /tmp
- name: wlp-output
mountPath: /opt/ibm/wlp/output
securityContext:
runAsUser: 1000
- name: netshoot
image: nicolaka/netshoot
imagePullPolicy: IfNotPresent
command: ["/bin/sleep", "3650d"]
securityContext:
capabilities:
add: ["NET_ADMIN"]
allowPrivilegeEscalation: true
privileged: true
volumes:
- name: wlp-output
emptyDir: {}
- name: tmp
emptyDir: {}

ServiceExports

Using the template below, create serviceexports.yaml. All fields in the template will remain the same except for two slice name instances which must be replaced with the name of your slice.

##################################################################################
# Details ServiceExport
##################################################################################
apiVersion: networking.kubeslice.io/v1beta1
kind: ServiceExport
metadata:
name: details
spec:
slice: <slice name> #Replace Slice Name
selector:
matchLabels:
app: details
ingressEnabled: false
ports:
- name: http
containerPort: 9080
protocol: TCP
---
##################################################################################
# Reviews ServiceExport
##################################################################################
apiVersion: networking.kubeslice.io/v1beta1
kind: ServiceExport
metadata:
name: reviews
spec:
slice: <slice name> #Replace Slice Name
selector:
matchLabels:
app: reviews
ingressEnabled: false
ports:
- name: http
containerPort: 9080
protocol: TCP

Deploy to the Productpage Cluster

Perform these steps:

  1. Use the following command to ensure we are targeting the cluster we will be deploying the product page to:
    kubectx <services cluster>
  2. Use the following command to apply the productpage.yaml file:
    kubectl apply -f productpage.yaml -n bookinfo
    Expected Output:
    service/productpage created
    serviceaccount/bookinfo-productpage created
    deployment.apps/productpage-v1 created
  3. Use the following command to check if the deployed productpage pod is running on the cluster:
    kubectl get pods -n bookinfo
    Expected Output
    NAME                              READY   STATUS    RESTARTS   AGE
    productpage-v1-5cc46fc6dc-drd8b 4/4 Running 0 26h

Deploy to the Service Cluster

Perform these steps:

  1. Use the following command to ensure we are targeting the cluster we deploy reviews, details, and ratings to:
    kubectx <services cluster>
  2. Use the following command to create the bookinfo namespace that we deploy these services on:
    kubectl create ns bookinfo
  3. Use the following command to label the bookinfo namespace for istio-injection:
    kubectl label namespace bookinfo istio-injection=enabled
  4. Using the following commands, apply the details.yaml, ratings.yaml, reviews.yaml, and serviceexports.yaml files. Use the following command to apply the details.yaml file.
    kubectl apply -f details.yaml -n bookinfo
    Expected Output
    service/details created
    serviceaccount/bookinfo-details created
    deployment.apps/details-v1 created
  5. Use the following command to apply the ratings.yaml file:
    kubectl apply -f ratings.yaml -n bookinfo
    Expected Output
    service/ratings created
    serviceaccount/bookinfo-ratings created
    deployment.apps/ratings-v1 created
  6. Use the following command to apply the reviews.yaml file:
    kubectl apply -f reviews.yaml -n bookinfo
    Expected Output
    service/reviews created
    serviceaccount/bookinfo-reviews created
    deployment.apps/reviews-v3 created
  7. Use the following command to verify if the deployed pods are running on the cluster:
    kubectl get pods -n bookinfo
    Expected Output
    NAME                          READY   STATUS    RESTARTS   AGE
    details-v1-557b474454-fbfhh 4/4 Running 0 26h
    ratings-v1-5846f848bb-4dwtz 4/4 Running 0 26h
    reviews-v3-64cf7654f4-cfqz8 4/4 Running 0 26h
  8. Use the following command to apply serviceexports.yaml file:
    kubectl apply -f serviceexports.yaml -n bookinfo
    Expected Output
    serviceexport.networking.kubeslice.io/details created
    serviceexport.networking.kubeslice.io/reviews created

Validate the BookInfo Deployment

Validate the Services

Perform these steps:

  1. Switch the contexts to target the services cluster.
    kubectx <services cluster>
  2. Use the following command to verify the details and reviews services have been successfully exported to the KubeSlice configuration:
    kubectl get serviceexport -n bookinfo
    Expected Output
    kubectl get serviceexport -n bookinfo
    NAME SLICE INGRESS PORT(S) ENDPOINTS STATUS
    details white true 9080/TCP 1 READY
    reviews white true 9080/TCP 1 READY

Validate the Productpage on the Cloud Cluster

Perform these steps:

  1. Switch contexts to target the productpage cluster.
    kubectx <productpage cluster>
  2. Using the following command, verify the details and reviews service imports are present in the cluster:
    kubectl get serviceimport -n bookinfo
    Expected Output
    NAME      SLICE   PORT(S)    ENDPOINTS   STATUS
    details white 9080/TCP 1 READY
    reviews white 9080/TCP 1 READY
  3. Use the following command to check the exposed port for the product page service. In a moment, use this port to visit the BookInfo webpage.
    kubectl get services -n bookinfo
    Expected Output
    NAME          TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)          AGE
    details ClusterIP 10.0.116.23 <none> 9080/TCP 2d2h
    productpage NodePort 10.0.20.209 <none> 9080:31194/TCP 2d2h
    reviews ClusterIP 10.0.146.220 <none> 9080/TCP 2d2h
info

To view the deployed BookInfo product page, we need the external IP of an application node and the exposed port we just retrieved.Take note of the external IP address of one of the application nodes to use it later.

  1. Use the following command to get your node details:
    kubectl get nodes -o wide
    Expected Output (your output will differ, here we are just focused on the external IP address).
    kubectl get nodes -o wide
    NAME STATUS ROLES AGE VERSION INTERNAL-IP EXTERNAL-IP OS-IMAGE
    KERNEL-VERSION CONTAINER-RUNTIME
    gke-preprod-knative--preprod-knative--aba5a0cc-9jrq Ready <none> 27h v1.20.15-gke.3600 10.6.0.4 35.231.181.81 Container-Optimized OS from Google 5.4.170+ containerd://1.4.8
    gke-preprod-knative--preprod-knative--aba5a0cc-xj3j Ready <none> 27h v1.20.15-gke.3600 10.6.0.5 35.243.229.81 Container-Optimized OS from Google 5.4.170+ containerd://1.4.8
    gke-preprod-knative--preprod-knative--d19d3a9f-c32x Ready <none> 28h v1.20.15-gke.3600 10.6.0.3 104.196.200.27 Container-Optimized OS from Google 5.4.170+ containerd://1.4.8
  2. Combine the external IP address the command returns with the port you retrieved in the last step in the format below, and visit the page in a browser to view your multi-cluster BookInfo deployment.
    http://<external ip>:<port>/productpage
    Example alt

Validate the Productpage on the Kind Cluster

Access the Productpage from the Local Machine

If the kind clusters are on a local machine, perform these steps:

  1. Set up port-forwarding from a local machine using the following command:
    kubectl port-forward svc/<service-name> -n <namespace-name> <host-port>:<container-port>
    Example
    kubectl port-forward svc/productpage -n bookinfo 31986:9080
  2. Open the browser to access the product page using the following URL:
    http://localhost:<host-port>/productpage
    Example
    http://localhost:31986/productpage

The following is an example of the product page: alt

Access the Productpage from the Cloud EC2 Machine

If the kind clusters are on Cloud EC2 Machine, perform these steps:

  1. Connect to your EC2 machine using SSH from your local machine using the following command:
    ssh -i <pemfile> ubuntu@<public IP> -N -L <hostport>:<nodeinternalip>:<container-port>
    Example
    ssh -i mykeypair.pem ubuntu@54.234.57.178 -N -L 8080:172.18.0.6:31986
  2. Open the browser to access the product page using the following URL:
    http://localhost:<hostport>/productpage
    Example
    http://localhost:8080/productpage

The following is an example of the product page: alt

success

You have successfully deployed BookInfo application on a KubeSlice configuration containing at least two clusters.

Uninstall Istio BookInfo

To uninstall BookInfo application from your KubeSlice configuration, follow the instructions in offboarding namespaces.